10/24

module top;
system_clock #400 clock1(a);
system_clock #200 clock1(b);
system_clock #100 clock1(c);
system_clock #50 clock1(d);
number n1(e,a,b,c,d);
endmodule
module number(e,a,b,c,d);
input a,b,c,d;
output e;
wire a1,b1,c1,d1,w1,w2,w3,w4,w5;
not(a1,a);
not(b1,b);
not(c1,c);
not(d1,d);
and(w1,a1,b,c1);
and(w2,a,c1,d1);
and(w3,a,b,d1);
and(w4,a,b1,c,d);
and(w5,a1,b1,c,d1);
or(e,w1,w2,w3,w4,w5);
endmodule
module system_clock(clk);
parameter PERIOD=100;
output clk;
reg clk;
initial
clk=0;
always
begin
#(PERIOD/2)clk=~clk;
end
always@(posedge clk)
if($time>1000)
$stop;
endmodule

課堂範例

範例：

程式碼：

module top;
system_clock #100 clock1(A);
system_clock #200 clock2(B);
system_clock #400 clock3(SEL);
mux ml(OUT,A,B,SEL);
endmodule
module mux(OUT, A,B,SEL);
output OUT;
input A,B,SEL;
not I5 (sel_n, SEL);
and I6 (sel_a, A, SEL);
and I7 (sel_b, sel_n, B);
or I4 (OUT, sel_a, sel_b);
endmodule
module system_clock(clk);
parameter PERIOD=100;
output clk;
reg clk;
initial
clk=0;
always
begin
#(PERIOD/2)clk=~clk;
end
always@(posedge clk)
if($time>1000)
$stop;
endmodule

時脈